Widths are available in set sizes and heights are in 0.25” increments. Single wide shutters have one bank of louvers and double wide have a vertical centered separation.
Read More
Select from a straight or eyebrow top. The height of the eyebrow drop can either be 1″, 2″ or 3″ from the top of the shutter.
Read More
Select from 10 unique designs. Configurations #2 – #10 incorporate at least one divider rail to create multiple vertical spaces.
View Configuration Details
There are two methods of attaching vinyl shutters to a building. Spikes are best for most applications. Screws are intended for installing to wood siding.
Read More
Vinyl shutters come in 19 standard molded through colors. A paintable version is available to finish after receipt.
View Colors
Exterior raised panel vinyl shutters replicate the form and appearance of the original wood design. Molded components are fastened together to form attractive, colorful, nearly maintenance-free outdoor shutters. Side stiles and horizontal rails surround a central elevated plateau, resulting in a structurally balanced window shutter.
Adding decorative vinyl shutters is a relatively quick and easy solution for fiscally responsible homeowners to add color, depth of field, and aesthetic interest to a home. Raised panel shutters are the second most frequently installed style and are easily identified. Ten profile options provide opportunity for existing lines or divisions continue through the shutter. 19 colors will match, blend or complement most modern and historical house plans.
Current production time:
Approximately 1-3 weeks
FREE shipping on most sizes
500+ Reviews (4.8)
ShutterLand supplies color-coordinated spikes or screws for installation of vinyl exterior shutters. Select the best method based on siding material. It is generally recommended to use shutter spikes in conjunction with all materials except for wood. This includes aluminum, vinyl, hardboard, brick, stucco, concrete and stone. Shutter spikes can also be used to secure to wood, but screws are preferred. Shutter screws are best to secure vinyl shutters to wood. Screws can be used with hard surfaces, such as brick, but then require wall anchors to properly adhere.
More Information
Single Wide:
7 Available: 7 – 17.75”
—
Double Wide:
8 Available: 13 – 29″
20 – 97″ in 0.25″ increments
1 – 4″ wide
Double wide only
1″ wide
2 – 3″ height
2 – 3″ height
Optional when height < 55″
Required when height >= 55″
10 Configurations (see all below)
2 – 3″ height
1.5″ wide beveled edge
0.125” thick
0.875″ thick
Polypropylene (all colors)
Polystyrene (paintable)
Wood grain textured surface
Straight
Eyebrow
Heat welded &
stapled components
Minimal
Standard exterior raised panel vinyl shutters are constructed from multiple components of durable polypropylene, heat welded and stapled tight together, and ready for installation when received. All decorative vinyl shutters have a molded wood grain surface texture and beaded detail, with a hollow open back that gains rigidity when affixed to the building.
A select number of common widths are offered to pair with custom shutter heights in one-quarter inch increments up to 97”. Sizes are nominal, and the actual width received may vary by 1/4 inch more or less than ordered. The actual height will be within 1/8 inch of the size ordered.
+ Lowest priced material
+ Impervious to moisture
+ Color through material
+ Do not expand and contract
+ Low-maintenance
+ Light weight for easy installation
+ Full range of heights available
+ 19 standard colors
+ Long life expectancy
+ Spikes or screws included for installation
+ Quick 1-3 weeks production time
+ Free shipping for most sizes
– Limited widths available
– Semi-plastic looking
– Can oxidize, requiring periodic cleaning
– Cannot be installed with hinges
– Cannot be repainted to change color
– Cannot be stained
– Hollow on back
Single-wide vinyl shutters are fabricated with a single horizontal raised panel. Double-wide shutters incorporate a vertical sub-stile, creating left and right raised panel areas. Window shutters manufactured in a double-wide configuration can be up to 29” in width.
Choose from either a standard straight or eyebrow top rail. The straight top is appropriate for rectangular window openings, while the eyebrow top can be manufactured with a 1″, 2″, or 3″ drop on one side. This scale works for windows that incorporate a slight arch at the top of a rectangular bottom. Vinyl shutters are sold in pairs, with one for the left side and one for the right side of the window. The eyebrow option is only available for single wide shutters.
Select from ten unique profiles to conform to the window configuration or to give additional character. The #1 designation will indicate no divider rail with one raised panel from top to bottom. Options #2 – #10 allocate either one, two, or three divider rails in various locations. It is wise to assess the target window for existing horizontal divisions so the divider rails can align.
19 standard outdoor colors coordinate well with both existing homes and new construction. Vinyl black shutters are definitely the most popular and widely utilized. Black shutters complement existing features of the house while remaining neutral in tone. White and grays work in a similar fashion to promote a unification of all components of the building.
Blue, brown and green shutters may garner greater prominence but also highlight the windows and draw attention to the front door. Red shutters are the ultimate accent and will catch the eye. Pre-colored shutters should not be painted. The “Paintable” designation is fabricated from Polystyrene and arrives ready to finish. Most major paint manufacturers have compiled collections of outdoor house colors that complement one another. We encourage you to find an arrangement that works best for your architecture style, geographic location and personal taste.
➤ Request free color samples in the mail for an on-site evaluation before ordering.
Installation of vinyl shutters is usually a relatively quick weekend home improvement project. The lightweight panels easily lift into place and secure with either rust resistant metal screws or shutter spikes. Minimal tools and no previous experience is required for this do-it-yourself task.
We provide shutter spikes or screws, depending on your assessment of what is necessary in the process of measuring for vinyl shutters. Use “Shutter Screws” to attach to wood, vinyl, and other soft siding. “Shutter Spikes” adhere vinyl shutters to hard surfaces such as masonry, stucco, or hardboard. Both screws and spikes are color coordinated to match the specified shutter color. Vinyl shutters can only be installed in an immobile position and cannot be operable (swing open and closed with operable hardware).
| Siding | Spikes* | Screws |
|---|---|---|
| Aluminum | Best | Fair |
| Vinyl | Best | Fair |
| Wood Shingles | Good | Best |
| Hardboard | Best | Requires Wall Anchors |
| Brick | Best | Requires Wall Anchors |
| Stucco | Best | Requires Wall Anchors |
| Concrete | Best | Requires Wall Anchors |
| Stone | Best | Requires Wall Anchors |
Faux hardware gives vinyl shutters additional ornamentation for maximum detail decorative hinges and shutter dogs are sold separately.
Raised panel vinyl shutters require about 1-3 weeks to manufacture.
ShutterLand has over 19 years of experience helping customers select the best exterior shutters for each unique application. We strive to provide comprehensive specifications and information about each exterior shutter style we offer.
Straight top shutters are manufactured with a square horizontal top.
Rail sizes are displayed in the “Dimensions” area on the main order page.
Arch top shutters are made with a curved top.
The specified shutter height is the dimension of the long vertical edge of the shutter.
The required springline is the measurement from the top of the shutter down to the start of the arch.
A divider rail is a horizontal bar (much like the top rail) that creates louver areas above and below the division. The divider rail height is 2 ½” on front and back and rabbeted to reduce gap between rail and louvers.
* The actual location of the divider rail may be slightly higher or lower than requested. The number of louvers will dictate the final placement.
* The actual location of the divider rails may be slightly higher or lower than requested. The number of louvers will dictate the final placement.
A divider rail is a horizontal bar (much like the top rail) that creates louver areas above and below the division. The divider rail height is 3″ for 1.75″ 1.5″ louvers.
* The actual location of the divider rail may be slightly higher or lower than requested. The number of louvers will dictate the final placement.
* The actual location of the divider rails may be slightly higher or lower than requested. The number of louvers will dictate the final placement.
A divider rail is a horizontal bar (much like the top rail) that creates louver areas above and below the division. The divider rail height is 3.5″ for 1.75″ louvers and 3″ for 1.5″ louvers.
* The actual location of the divider rail may be slightly higher or lower than requested. The number of louvers will dictate the final placement.
* The actual location of the divider rails may be slightly higher or lower than requested. The number of louvers will dictate the final placement.
PVC exterior shutters install to the side of the window using one of two methods.
Stationary shutters permanently attach to the side of the window in a fixed location with the included polycarbonate mounting brackets.
Functional shutters mount with operable exterior hardware to pivot from a position flanking the window to cover the window opening.
How the window is measured depends on which of these two options is selected.
Wood exterior shutters install to the side of the window using one of two methods.
Stationary shutters permanently attach to the side of the window in a fixed location.
Functional shutters mount with operable exterior hardware to pivot from a position flanking the window to cover the window opening.
How the window is measured depends on which of these two options is selected.
ShutterLand’s manufacturing process has been streamlined to keep costs and manufacturing time at a minimum. Therefore, we do not deviate from these two louver sizes.
A tilt bar is a narrow vertical wood rod that interconnects a group of horizontal louvers. A tilt bar used in conjunction with movable louvers unifies the slats and allows them to rotate at one time. Louvers on ShutterLand premium wood louvers are fixed in position and do not rotate. A faux tilt bar can be attached to replicate the appearance of movable louvers, usually for historical purposes. Selection of a tilt bar adds $40 to the price of each shutter.
Most exterior shutter applications do not require a tilt bar.
If a divider rail is employed, the tilt bar can be added to all louver sections or only added to one section.
After incorporating a tilt bar, it is necessary to establish if the tilt bar will be applied to all louvers and if the louvers will be in an up or down position.
The tilt bar can be attached on the side of the shutter with the louvers in a down position.
The tilt bar can be attached on the side of the shutter with the louvers in an up position.
Red Grandis is a nearly perfect high quality hardwood to manufacture exceptional exterior shutters. It has straight tight grain and minimal knotting, resulting in a consistently smooth texture. The fibers are relatively uniform in color with variations from light pink to dark red, and accept paint or stain well. Red Grandis is dimensionally stable and extremely strong.
Cedar is the most common and recognizable tree species for the construction of outdoor shutters. This aromatic timber is resistant to both insects and decay. Cedar has condensed grain with few knots, resulting in straight handsome shutters with tones of red, brown, and tan. Cedar paints and stain well.
Mahogany has a compact grain with a rich, warm, reddish-brown hue. Mahogany shutters are strong, sturdy, and moisture resistant. Mahogany is relatively easy to finish and is heavier than other woods offered.
A tilt bar is a narrow vertical wood rod that interconnects a group of horizontal louvers. A tilt bar used in conjunction with movable louvers unifies the slats and allows them to rotate at one time. Louvers on ShutterLand wood louvers are fixed in position and do not rotate. A faux tilt bar can be attached to replicate the appearance of movable louvers, usually for historical purposes. Selection of a tilt bar adds $40 to the price of each shutter.
Most exterior shutter applications do not require a tilt bar.
If a divider rail is employed, the tilt bar can be added to all louver sections or only added to one section.
After incorporating a tilt bar, it is necessary to establish if the tilt bar will be applied to all louvers and if the louvers will be in an up or down position.
The tilt bar can be attached on the side of the shutter with the louvers in a down position.
The tilt bar can be attached on the side of the shutter with the louvers in an up position.
ShutterLand’s manufacturing process has been streamlined to keep costs and manufacturing time at a minimum. Therefore, we do not deviate from this louver size.
Southern Yellow Pine is the most affordable solid wood option. This wood has a beautiful golden color with a distinct wood grain pattern that is 99.9% knot free. It is kiln-dried to minimum moisture content and cut to 1″ thick shutters. The joints between stiles and rails are glued, doweled, and screwed for ultimate strength.
Southern Yellow Pine shutters are considered entry-level, or builder grade, with lower performance standards compared to 1.5″ thick premium wood shutters.
Composite exterior shutters install in a stationary position to the side of the window with the included Lexan polycarbonate fixed mounting brackets.
The v-shaped 1-1/8″ x 1-1/8″ brackets are specifically suited for use with outdoor composite shutters. The vertical side of the bracket attaches to the building and the horizontal side to the top or bottom of the shutter. The brackets extend the full width of the shutter and are not easily visible after installation.
ShutterLand’s manufacturing process has been streamlined to keep costs and manufacturing time at a minimum. Therefore, we do not deviate from these two louver sizes.
A tilt bar is a narrow vertical wood rod that interconnects a group of horizontal louvers. Historically, a tilt bar unifies a group of movable louvers to allow them to rotate at one time. ShutterLand composite louvers are fixed in a downward-pointing position and do NOT rotate. A faux tilt bar can be attached to replicate the appearance of movable louvers, usually for historical purposes. Selection of a tilt bar adds $40 to the price of each shutter.
Most exterior shutter applications do not require a tilt bar.
ShutterLand composite shutters are constructed from Extira. The material is manufactured from sustainable wood fibers and marine-grade resins to form large 1.25″ thick solid straight sheets. Individual components are then milled and fabricated into custom shutters. Extira is designed for outdoor applications where humidity and moisture varies. It is strong and resilient with a long projected life.
Unfinished shutters are raw with no finish applied. Small blemishes may be repaired with wood filler, which will arrive sanded smooth and ready to finish. Filled areas will not diminish the integrity of the shutter or show through the paint. PVC shutters do not require priming and it is not necessary for paint adhesion.
Select from 9 standard paint colors. Painted exterior shutters are sprayed with two ultra-durable, water-borne commercial-grade Benjamin Moore Corotech COMMAND acrylic top coats. The factory applied paint covers all surfaces in a smooth satin sheen finish.
Choose a custom paint color for a one-time amount of $200 to match the color (NOT per shutter). Provide the paint manufacturer, color name, and color code to match. Or a color chip or physical sample may be mailed to match.
Painted PVC exterior shutters are lightly sanded and sprayed with two ultra-durable, water-borne commercial-grade Benjamin Moore Corotech COMMAND acrylic top coats. The factory applied paint covers all surfaces in a smooth satin sheen finish. The paint manufacturer specifically instructs that PVC shutters not be primed in preparation for application of paint.
Unfinished shutters are raw with no finish applied. All surfaces are sanded. Small blemishes are repaired with wood filler, which will arrive sanded smooth and ready to finish. Filled areas will not diminish the integrity of the shutter or show through the paint. Priming is recommended to seal the grain and support paint adhesion.
Unfinished shutters are raw with no finish applied. All surfaces are thoroughly sanded. Wood is selected for a relatively uniform grain. Minor blemishes (if any) are repaired with stainable wood filler, which will arrive sanded smooth and ready to finish. Filled areas will not diminish the integrity or appearance of the shutter.
Primed shutters are sprayed with Benjamin Moore Aqua Lock Plus acrylic water-based universal primer / sealer. This primer provides complete coverage to seal the porous raw surface, block stains and prevent bleed-through. The medium gray primed surface will need to be sanded with 220 grit sandpaper and wiped clear of dust before painting.
Select from 9 standard paint colors. Painted exterior shutters are sanded, primed, sanded, and sprayed with two ultra-durable, water-borne commercial-grade Benjamin Moore Corotech COMMAND acrylic top coats. The factory applied paint covers all surfaces in a smooth satin sheen finish.
Choose a custom paint color for a one-time amount of $200 to match the color (NOT per shutter). Provide the paint manufacturer, color name, and color code to match. Or a color chip or physical sample may be mailed to match.
Painted exterior shutters are sanded, primed, sanded, and sprayed with two ultra-durable, water-borne commercial-grade Benjamin Moore Corotech COMMAND acrylic top coats. The factory applied paint covers all surfaces in a smooth satin sheen finish.
Straight top shutters are manufactured with a square horizontal top.
Rail sizes are displayed in the “Dimensions” area on the main order page.
Arch top shutters are made with a curved top.
The specified shutter height is the dimension of the long vertical edge of the shutter.
The required springline is the measurement from the top of the shutter down to the start of the arch.
Crafted with a ⅝” thick central plateau surrounded by a 1 ⅛” wide bevel
Flat on back of shutter
Material: Extira composite
Made with a flat ⅝” thick interior panel
Flat on back of shutter
Material: Extira composite
Made with a flat ⅝” thick interior panel with grooves cut to simulate vertical boards.
Shutter width:
2 grooves: 14” to 17 ¾”
3 grooves: 18” to 23 ¾”
4 grooves: 24” to 31 ¾”
5 grooves: 32” to 39 ¾”
6 grooves: 40” to 45”
Flat on back of shutter
Material: Extira composite
A divider rail is a horizontal bar (much like the top rail) that creates raised panel areas above and below the division.
Solid panel with no divider rail
Solid panel with one divider rail
Measure from the bottom of the shutter to the desired center of the divider rail
Solid panel with two divider rails
Measure from the bottom of the shutter to the desired center of the first divider rail
Then, measure from the bottom of the shutter to the desired center of the second divider rail
Unfinished shutters are raw with no finish applied. All surfaces are thoroughly sanded. Small blemishes are repaired with wood filler, which will arrive sanded smooth and ready to finish. Filled areas will not diminish the integrity of the shutter or show through the paint. Priming is recommended to seal the grain and support paint adhesion. Solid panel areas are composite and cannot be stained.
Primed shutters are sprayed with Benjamin Moore Aqua Lock Plus acrylic water-based universal primer / sealer. This primer provides complete coverage to seal the porous raw surface, block stains and prevent bleed-through. The medium gray primed surface will need to be sanded with 220 grit sandpaper and wiped clear of dust before painting.
Select from 9 standard paint colors. Painted exterior shutters are sanded, primed, sanded, and sprayed with two ultra-durable, water-borne commercial-grade Benjamin Moore Corotech COMMAND acrylic top coats. The factory applied paint covers all surfaces in a smooth satin sheen finish.
Choose a custom paint color for a one-time amount of $200 to match the color (NOT per shutter). Provide the paint manufacturer, color name, and color code to match. Or a color chip or physical sample may be mailed to match.
Painted exterior shutters are sanded, primed, sanded, and sprayed with two ultra-durable, water-borne commercial-grade Benjamin Moore Corotech COMMAND acrylic top coats. The factory applied paint covers all surfaces in a smooth satin sheen finish.
Unfinished shutters are raw with no finish applied. All surfaces are thoroughly sanded. Small blemishes are repaired with wood filler, which will arrive sanded smooth and ready to finish. Filled areas will not diminish the integrity of the shutter or show through the paint. Priming is recommended to seal the grain and support paint adhesion. Solid panel areas are composite and cannot be stained.
Primed shutters are sprayed with Benjamin Moore Aqua Lock Plus acrylic water-based universal primer / sealer. This primer provides complete coverage to seal the porous raw surface, block stains and prevent bleed-through. The medium gray primed surface will need to be sanded with 220 grit sandpaper and wiped clear of dust before painting.
Select from 9 standard paint colors. Painted exterior shutters are sanded, primed, sanded, and sprayed with two ultra-durable, water-borne commercial-grade Benjamin Moore Corotech COMMAND acrylic top coats. The factory applied paint covers all surfaces in a smooth satin sheen finish.
Choose a custom paint color for a one-time amount of $200 to match the color (NOT per shutter). Provide the paint manufacturer, color name, and color code to match. Or a color chip or physical sample may be mailed to match.
Painted exterior shutters are sanded, primed, sanded, and sprayed with two ultra-durable, water-borne commercial-grade Benjamin Moore Corotech COMMAND acrylic top coats. The factory applied paint covers all surfaces in a smooth satin sheen finish.
Unfinished shutters are raw with no finish applied. All surfaces are sanded, ready to be primed. Priming is recommended to seal the material and support paint adhesion. Extira composite cannot be stained.
Primed shutters are sprayed with Benjamin Moore Aqua Lock Plus acrylic water-based universal primer / sealer. This primer provides complete coverage to seal the porous raw surface and block stains. The medium gray primed surface will need to be sanded with 220 grit sandpaper and wiped clear of dust before painting.
Select from 9 standard paint colors. Painted exterior shutters are sanded, primed, sanded, and sprayed with two ultra-durable, water-borne commercial-grade Benjamin Moore Corotech COMMAND acrylic top coats. The factory applied paint covers all surfaces in a satin sheen finish.
Choose a custom paint color for a one-time amount of $200 to match the color (NOT per shutter). Provide the paint manufacturer, color name, and color code to match. Or a color chip or physical sample may be mailed to match.
Painted exterior shutters are sanded, primed, sanded, and sprayed with two ultra-durable, water-borne commercial-grade Benjamin Moore Corotech COMMAND acrylic top coats. The factory applied paint covers all surfaces in a smooth satin sheen finish.
Select from 9 standard paint colors plus an unlimited selection of custom colors.
Unfinished shutters are raw with no finish applied. All surfaces are thoroughly sanded. Small blemishes are repaired with wood filler, which will arrive sanded smooth and ready to finish. Filled areas will not diminish the integrity of the shutter or show through the paint. Priming is recommended to seal the grain and support paint adhesion.
Unfinished shutters are raw with no finish applied. All surfaces are thoroughly sanded. Wood is selected for a relatively uniform grain. Minor blemishes (if any) are repaired with stainable wood filler, which will arrive sanded smooth and ready to finish. Filled areas will not diminish the integrity or appearance of the shutter.
Primed shutters are sprayed with Benjamin Moore Aqua Lock Plus acrylic water-based universal primer / sealer. This primer provides complete coverage to seal the porous raw surface, block stains and prevent bleed-through. The medium gray primed surface will need to be sanded with 220 grit sandpaper and wiped clear of dust before painting.
Select from 9 standard paint colors. Painted exterior shutters are sanded, primed, sanded, and sprayed with two ultra-durable, water-borne commercial-grade Benjamin Moore Corotech COMMAND acrylic top coats. The factory applied paint covers all surfaces in a smooth satin sheen finish.
Choose a custom paint color for a one-time amount of $200 to match the color (NOT per shutter). Provide the paint manufacturer, color name, and color code to match. Or a color chip or physical sample may be mailed to match.
Painted exterior shutters are sanded, primed, sanded, and sprayed with two ultra-durable, water-borne commercial-grade Benjamin Moore Corotech COMMAND acrylic top coats. The factory applied paint covers all surfaces in a smooth satin sheen finish.
Straight top shutters have a standard horizontal top rail.
*Image represents single wide shutters; double wide shutter have a vertical sub-stile.
A cathedral top is made with a small arc at the bottom of the top rail.
*Image represents single wide shutters; double wide shutter have a vertical sub-stile.
The arch of a 1:1 drop is equal to the width. So the measurement from the top of the shutter down to the start of the arch is the same as the shutter width.
A pair of arch top shutters includes one shutter with the arch on the left side and one with the arch on the right.
*Double wide shutter cannot be made with an arch top.
A custom arch requires a springline measurement.
Springline – the dimension from the top of the shutter down to the start of the arch.
A pair of arch top shutters includes one shutter with the arch on the left side and one with the arch on the right.
*Double wide shutter cannot be made with an arch top.
Shutter screws are best used to install vinyl shutters to wood siding. The screw heads are painted to match the shutter color.
Shutters are not pre-drilled.
Vinyl shutter spikes are designed to secure shutters to most surfaces. Screws are usually better for installing to wood. Scales, or ridges, of the shutter spike hold the apparatus in position. They are color coordinated to match the shutters.
Shutters are not pre-drilled.
100% louvers top to bottom
At least one divider rail is required when the shutter height is equal to or greater than 55″. This option becomes unavailable when the height selected exceeds 54.75″.
The illustration depicts only the stiles and rails.
Louvers fill the open area.
*Image represents single wide shutters; double wide shutter have a vertical sub-stile.
One centered divider rail
50% louvers above
50% louvers below
The illustration depicts only the stiles and rails.
Louvers fill the open area.
*Image represents single wide shutters; double wide shutter have a vertical sub-stile.
Two divider rails
33% louvers at top
33% louvers at center
33% louvers at bottom
The illustration depicts only the stiles and rails.
Louvers fill the open area.
*Image represents single wide shutters; double wide shutter have a vertical sub-stile.
Two divider rails
20% louvers at top
60% louvers at center
20% louvers at bottom
The illustration depicts only the stiles and rails.
Louvers fill the open area.
*Image represents single wide shutters; double wide shutter have a vertical sub-stile.
One divider rail
60% louvers above
40% louvers below
The illustration depicts only the stiles and rails.
Louvers fill the open area.
*Image represents single wide shutters; double wide shutter have a vertical sub-stile.
Three divider rails
25% louvers at top
25% louvers at center
25% louvers at center
25% louvers at bottom
The illustration depicts only the stiles and rails.
Louvers fill the open area.
*Image represents single wide shutters; double wide shutter have a vertical sub-stile.
One divider rail
40% louvers above
60% louvers below
The illustration depicts only the stiles and rails.
Louvers fill the open area.
*Image represents single wide shutters; double wide shutter have a vertical sub-stile.
Two divider rails
20% louvers at top
40% louvers at center
40% louvers at bottom
The illustration depicts only the stiles and rails.
Louvers fill the open area.
*Image represents single wide shutters; double wide shutter have a vertical sub-stile.
One divider rail
20% louvers above
80% louvers below
The illustration depicts only the stiles and rails.
Louvers fill the open area.
*Image represents single wide shutters; double wide shutter have a vertical sub-stile.
Two divider rails
40% louvers at top
20% louvers at center
40% louvers at bottom
The illustration depicts only the stiles and rails.
Louvers fill the open area.
*Image represents single wide shutters; double wide shutter have a vertical sub-stile.
Shutter screws are included to install board and batten vinyl shutters. The screw heads are painted to match the shutter color.
Shutter spikes are not long enough to extend through both the board and batten.
Shutters are not pre-drilled.
A divider rail is a horizontal bar (much like the top rail) that creates solid panel areas above and below the division.
Solid panel with no divider rail
Solid panel with one divider rail
Division Point 1: Measure from the bottom of the shutter to the desired center of the divider rail
Solid panel with two divider rails
Division Point 1: Measure from the bottom of the shutter to the desired center of the first divider rail
Division Point 2: Measure from the bottom of the shutter to the desired center of the second divider rail
Raised panels have beveled edges with a flat plateau in the center. The solid flat panel section is composite.
Flat panel shutters are constructed with a central even surface with no detail. The solid flat panel section is composite.
Shaker panel shutters are fabricated with vertical grooves cut into the central surface. The solid grooved panel section is composite. The number of grooves is based on the shutter width.
Vertical grooves:
2 grooves for shutter widths 14” to 17 ¾”
3 grooves for shutter widths 18” to 23 ¾”
4 grooves for shutter widths 24” to 31 ¾”
5 grooves for shutter widths 32” to 39 ¾”
6 grooves for shutter widths 40” to 45”
A divider rail is a horizontal bar (much like the top rail) that creates one louver area above or below the division with a solid panel in the other section.
A horizontal divider rail is necessary to separate the top section of a combination shutter from the bottom. The solid panel section is composite. Divider rail size is displayed under “Dimensions” on the main order page
* The actual location of the divider rail may be slightly higher or lower than requested. The number of louvers will dictate the final placement.
Straight top shutters are manufactured with a square horizontal top.
Arch top shutters are made with a curved top.
The specified shutter height is the dimension of the long vertical edge of the shutter.
The required springline is the measurement from the top of the shutter down to the start of the arch.
Composite exterior shutters install in a stationary position to the side of the window with the included Lexan polycarbonate fixed mounting brackets.
The v-shaped 1-1/8″ x 1-1/8″ brackets are specifically suited for use with outdoor composite shutters. The vertical side of the bracket attaches to the building and the horizontal side to the top or bottom of the shutter. The brackets extend the full width of the shutter and are not easily visible after installation.
Wood exterior shutters install to the side of the window using one of two methods.
Stationary shutters permanently attach to the side of the window in a fixed location.
Functional shutters mount with operable exterior hardware to pivot from a position flanking the window to cover the window opening.
How the window is measured depends on which of these two options is selected.
The number of boards is based on the shutter width.
3 boards for widths 12” to 17 ¾”
4 boards for widths 18” to 23 ¾”
5 boards for widths 24” to 31 ¾”
6 boards for widths 32” to 39 ¾”
7 boards for widths 40” to 48”
Composite exterior shutters install in a stationary position to the side of the window with the included Lexan polycarbonate fixed mounting brackets.
The v-shaped 1-1/8″ x 1-1/8″ brackets are specifically suited for use with outdoor composite shutters. One side of the bracket attaches to the building. The vertical side of the bracket attaches to the building. The brackets extend the full width of the shutter and are not easily visible after installed.
The shutter measurements are based on the window
The illusion of boards is created with vertical grooves cut into the solid composite sheet. The number of boards is based on the shutter width.
3 boards for widths 12” to 17 ¾”
4 boards for widths 18” to 23 ¾”
5 boards for widths 24” to 31 ¾”
6 boards for widths 32” to 39 ¾”
7 boards for widths 40” to 48”
Top batten placed 7” below top of shutter
Bottom batten placed 7” above bottom of shutter
Battens 3.5″ in height
Width 0.75” less than shutter
Top batten placed 7” below top of shutter
Batten placed at center
Bottom batten placed 7” above bottom of shutter
Battens 3.5″ in height
Width 0.75” less than shutter
Top batten placed 7” below top of shutter
Two battens equally spaced between top and bottom
Bottom batten placed 7” above bottom of shutter
Battens 3.5″ in height
Width 0.75” less than shutter
Top batten placed 7” below top of shutter
Batten placed at diagonal from bottom right of top batten to top left of bottom batten
Bottom batten placed 7” above bottom of shutter
Battens 3.5″ in height
Width 0.75” less than shutter
Top batten placed 7” below top of shutter
Batten placed at diagonal from bottom left of top batten to top right of bottom batten
Bottom batten placed 7” above bottom of shutter
Battens 3.5″ in height
Width 0.75” less than shutter
Top batten placed 7” below top of shutter
Bottom batten placed 7” above bottom of shutter
Battens 3.5″ in height
Width 0.75” less than shutter
Configuration optional when shutter height less than 55″.
A third batten is required when the shutter height is equal to or greater than 55″. (The two batten option will become unavailable on the order page)
Top batten placed 7” below top of shutter
Batten placed at center
Bottom batten placed 7” above bottom of shutter
Battens 3.5″ in height
Width 0.75” less than shutter
Top batten placed 7” below top of shutter
Two battens equally spaced between top and bottom
Bottom batten placed 7” above bottom of shutter
Battens 3.5″ in height
Width 0.75” less than shutter
Top batten placed 7” below top of shutter
Batten placed at diagonal from bottom right of top batten to top left of bottom batten
Bottom batten placed 7” above bottom of shutter
Battens 3.5″ in height
Width 0.75” less than shutter
Top batten placed 7” below top of shutter
Batten placed at diagonal from bottom left of top batten to top right of bottom batten
Bottom batten placed 7” above bottom of shutter
Battens 3.5″ in height
Width 0.75” less than shutter
ShutterLand’s manufacturing process has been streamlined to keep costs and manufacturing time at a minimum. Therefore, we do not deviate from these two louver sizes.
Bahama shutters are uniquely designed to span the width of entire windows. A vertical sub-stile is used to create multiple louver areas to prevent them from exceeding their natural width limitation. The number of sub-stiles based on the schedule below.
Shutter Width: 16 – 27″
(Option automatically removed from the order page if shutter width is outside of these parameters)
Shutter Width: 24 – 50″
(Option automatically removed from the order page if shutter width is outside of these parameters)
Shutter Width: 36 – 60″
(Option automatically removed from the order page if shutter width is outside of these parameters)
Shutter Width: 48 – 60″
(Option automatically removed from the order page if shutter width is outside of these parameters)
Shutter Width: 60″
(Option automatically removed from the order page if shutter width is outside of these parameters)
Bahama shutters are uniquely designed to span the width of entire windows. A vertical sub-stile is used to create multiple louver areas to prevent them from exceeding their natural width limitation. The number of sub-stiles based on the schedule below.
Shutter Width: 15 – 23.5″
(Option automatically removed from the order page if shutter width is outside of these parameters)
Shutter Width: 23.75 – 45″
(Option automatically removed from the order page if shutter width is outside of these parameters)
Shutter Width: 36 – 66.25″
If the shutter width exceeds 65″, all stile sizes will increase incrementally up to 4”. Select a greater number of sub-stiles to keep stiles at standard 2.125″.
(Option automatically removed from the order page if shutter width is outside of these parameters)
Shutter Width: 48 – 85″
(Option automatically removed from the order page if shutter width is outside of these parameters)
Shutter Width: 60 – 85″
(Option automatically removed from the order page if shutter width is outside of these parameters)
Bahama shutters install to the top of a window with functional hinges and extend away from the building at the bottom with shutter stays. The shutter can nest inside of a window opening with sufficient depth or sit just proud of the trim. Most Bahama shutters cover the full height of the window, while others are shorter and serve as a canopy over the top portion.
Boards arranged tight together
Arranged with 1/4 inch gap between boards
Individual board widths are adjusted to accommodate the gap and maintain the specified shutter width
Single Wide shutters have one vertical bank of louvers. They are available in 7 set widths.
Suggested shutter widths based on window size:
| Window Width | Single Wide Shutter Width |
| 16″ or smaller | 7″ |
| 17″ – 22″ | 9″ or 10″ |
| 23″ – 31″ | 12″ or 14.5″ |
| 32″ – 40″ | 14.5″, 16.25″ or 17.75″ |
Double Wide vinyl shutters are made with a center vertical style for support that creates left and right louver areas. They are available in 8 widths.
Suggested shutter widths based on window size:
| Window Width | Double Wide Shutter Width |
| 23″ – 31″ | 13″ |
| 32″ – 40″ | 14.875″ or 19″ |
| 41″ – 45″ | 19″ or 20.875″ |
| 46″ – 53″ | 23.875″ or 25.75″ |
| 54″ + | 27.5″ or 29″ |
20 – 97″ in ¼″ increments
Vinyl shutters in the 19 standard colors are constructed from Polypropylene. The color is molded through the material and shutters arrive ready to install. Polypropylene cannot be painted. The paintable finish shutters are fabricated from Polystyrene and are translucent opal in color.
All vinyl shutters have a wood grain textured surface. Vinyl shutters are constructed in the form of a shell, with four sides, a front and a hollow back. The panels can feel flimsy right out of the box and may not have the rigidity one expects from wood or composite shutters. They gain great strength and stability when they are attached to the building.
Vinyl shutters in the 19 standard colors are constructed from Polypropylene. The color is molded through the material and arrive ready to install. Polypropylene cannot be painted. The paintable finish shutters are fabricated from Polystyrene and are translucent opal in color.
All vinyl shutters have a wood grain textured surface. Vinyl shutters are are constructed in the form of a shell, with four sides, a front and a hollow back. The panels can feel flimsy right out of the box and may not have the rigidity one expects from wood or composite shutters. They gain great strength and stability when they are attached to the building.
Vinyl shutters are available in 19 standard colors plus one paintable version. Colors are molded through the vinyl material for a lifetime finish. If color is critical, do not make a selection from a digital display. Request free color samples for physical onsite examination. Prefinished colors cannot be painted.
Single Wide shutters are available in 7 set widths.
Suggested shutter widths based on window size:
| Window Width | Single Wide Shutter Width |
| 16″ or smaller | 7″ |
| 17″ – 22″ | 9″ or 10″ |
| 23″ – 31″ | 12″ or 14.5″ |
| 32″ – 40″ | 14.5″, 16.25″ or 17.75″ |
Double Wide vinyl shutters are made with a center vertical style for support that creates left and right raised panel areas. They are available in 8 widths.
Suggested shutter widths based on window size:
| Window Width | Double Wide Shutter Width |
| 23″ – 31″ | 13″ |
| 32″ – 40″ | 14.875″ or 19″ |
| 41″ – 45″ | 19″ or 20.875″ |
| 46″ – 53″ | 23.875″ or 25.75″ |
| 54″ + | 27.5″ or 29″ |
20 – 97″ in ¼″ increments
Single Wide shutters are available in 7 set widths.
Suggested shutter widths based on window size:
| Window Width | Single Wide Shutter Width |
| 16″ or smaller | 7″ |
| 17″ – 22″ | 9″ or 10″ |
| 23″ – 31″ | 12″ or 14.5″ |
| 32″ – 40″ | 14.5″, 16.25″ or 17.75″ |
Double Wide vinyl shutters are made with a center vertical style for support that creates left and right areas. They are available in 8 widths.
Suggested shutter widths based on window size:
| Window Width | Double Wide Shutter Width |
| 23″ – 31″ | 13″ |
| 32″ – 40″ | 14.875″ or 19″ |
| 41″ – 45″ | 19″ or 20.875″ |
| 46″ – 53″ | 23.875″ or 25.75″ |
| 54″ + | 27.5″ or 29″ |
20 – 97″ in ¼″ increments
Straight top shutters have a standard horizontal top rail.
*Image represents single wide shutters; double wide shutter have a vertical sub-stile.
Eyebrow top shutters are made with a slight curve in the top from the high side of the shutter down to the opposite side. Select from either a 1″, 2″ or 3″ drop. The drop (also called the springline) is the measurement from the top of the shutter down to the start of the curve. The shape of the raised panel area will remain rectangular.
A pair of eyebrow top shutters includes one shutter with the drop on the left side and one with the drop on the right.
*Only single wide shutters can be made with an eyebrow top. Double wide shutter have a vertical sub-stile and can only be made with a straight top.
100% raised panel top to bottom
At least one divider rail is required when the shutter height is equal to or greater than 55″. This option becomes unavailable when the height selected exceeds 54.75″.
The illustration depicts only the stiles and rails.
A raised panel fills the open area.
*Image represents single wide shutters; double wide shutter have a vertical sub-stile.
One centered divider rail
50% raised panel above
50% raised panel below
The illustration depicts only the stiles and rails.
A raised panel fills the open area.
*Image represents single wide shutters; double wide shutter have a vertical sub-stile.
Two divider rails
33% raised panel at top
33% raised panel at center
33% raised panel at bottom
The illustration depicts only the stiles and rails.
A raised panel fills the open area.
*Image represents single wide shutters; double wide shutter have a vertical sub-stile.
Two divider rails
20% raised panel at top
60% raised panel at center
20% raised panel at bottom
The illustration depicts only the stiles and rails.
A raised panel fills the open area.
*Image represents single wide shutters; double wide shutter have a vertical sub-stile.
One divider rail
60% raised panel above
40% raised panel below
The illustration depicts only the stiles and rails.
A raised panel fills the open area.
*Image represents single wide shutters; double wide shutter have a vertical sub-stile.
Three divider rails
25% raised panel at top
25% raised panel at center
25% raised panel at center
25% raised panel at bottom
The illustration depicts only the stiles and rails.
A raised panel fills the open area.
*Image represents single wide shutters; double wide shutter have a vertical sub-stile.
One divider rail
40% raised panel above
60% raised panel below
The illustration depicts only the stiles and rails.
A raised panel fills the open area.
*Image represents single wide shutters; double wide shutter have a vertical sub-stile.
Two divider rails
20% raised panel at top
40% raised panel at center
40% raised panel at bottom
The illustration depicts only the stiles and rails.
A raised panel fills the open area.
*Image represents single wide shutters; double wide shutter have a vertical sub-stile.
One divider rail
20% raised panel above
80% raised panel below
The illustration depicts only the stiles and rails.
A raised panel fills the open area.
*Image represents single wide shutters; double wide shutter have a vertical sub-stile.
Two divider rails
40% raised panel at top
20% raised panel at center
40% raised panel at bottom
The illustration depicts only the stiles and rails.
A raised panel fills the open area.
*Image represents single wide shutters; double wide shutter have a vertical sub-stile.
Straight top shutters have a standard horizontal top rail.
*Image represents single wide shutters; double wide shutter have a vertical sub-stile.
Eyebrow top shutters are made with a slight curve in the top from the high side of the shutter down to the opposite side. Select from either a 1″, 2″ or 3″ drop. The drop is the measurement from the top of the shutter down to the start of the curve. The shape of the top raised panel or louver area will remain rectangular.
*Only single wide shutters can be made with an eyebrow top. Double wide shutter have a vertical sub-stile and can only be made with a straight top.
Vinyl shutters in the 19 standard colors are constructed from Polypropylene. The color is molded through the material and arrive ready to install. Polypropylene cannot be painted. The paintable finish shutters are fabricated from Polystyrene and are translucent opal in color.
All vinyl shutters have a wood grain textured surface. Vinyl shutters are are constructed in the form of a shell, with four sides, a front and a hollow back. The panels can feel flimsy right out of the box and may not have the rigidity one expects from wood or composite shutters. They gain great strength and stability when they are attached to the building.
One centered divider rail
50% raised panel above
50% louvered below
*Image represents single wide shutters; double wide shutter have a vertical sub-stile.
Two divider rails
33% louvers at top
33% raised panel at center
33% louvers at bottom
*Image represents single wide shutters; double wide shutter have a vertical sub-stile.
Three divider rails
25% louvers at top
25% raised panel at center
25% louvers at center
25% raised panel at bottom
*Image represents single wide shutters; double wide shutter have a vertical sub-stile.
One divider rail
50% louvered above
50% raised panel below
*Image represents single wide shutters; double wide shutter have a vertical sub-stile.
Two divider rails
33% raised panel at top
33% louvered center
33% raised panel at bottom
*Image represents single wide shutters; double wide shutter have a vertical sub-stile.
Two divider rails
20% louvers at top
60% raised panel at center
20% louvered at bottom
*Image represents single wide shutters; double wide shutter have a vertical sub-stile.
Board & Batten closed weave shutters are available in seven fixed widths. The individual board widths are 3.375″.
2 boards: 6.875″
3 boards: 10.25″
4 boards: 13.875″
5 boards: 17.25″
6 boards: 20.75″
7 boards: 23.875″
8 boards: 27.25″
Height: 20 – 97″ in 0.25″ increments
Board & Batten open weave shutters are available in seven fixed widths. The individual board widths are 3.375″ with a 0.75″ – 0.875″ gap between boards.
2 boards: 7.625″
3 boards: 12″
4 boards: 16″
5 boards: 20″
6 boards: 24.375″
7 boards: 28.625″
8 boards: 33″
Height: 20 – 97″ in 0.25″ increments
2 battens (each 3.375″ in height)
Top batten below the top of the shutter*
Bottom batten above the bottom of the shutter*
3 battens (each 3.375″ in height)
Top batten below the top of the shutter*
50% space
Center batten
50% space
Bottom batten above the bottom of the shutter*
4 battens (each 3.375″ in height)
Top batten below the top of the shutter*
33% space
Center batten
33% space
Center batten
33% space
Bottom batten above the bottom of the shutter*
4 battens (each 3.375″ in height)
Top batten below the top of the shutter*
20% space
Center batten
60% space
Center batten
20%
Bottom batten above the bottom of the shutter*
3 battens (each 3.375″ in height)
Top batten below the top of the shutter*
60% space
Center batten
40% space
Bottom batten above the bottom of the shutter*
5 battens (each 3.375″ in height)
Top batten below the top of the shutter*
25% space
Center batten
25% space
Center batten
25% space
Center batten
25% space
Bottom batten above the bottom of the shutter*
3 battens (each 3.375″ in height)
Top batten below the top of the shutter*
40% space
Center batten
60% space
Bottom batten above the bottom of the shutter*
4 battens (each 3.375″ in height)
Top batten below the top of the shutter*
20% space
Center batten
40% space
Center batten
40% space
Bottom batten above the bottom of the shutter*
3 battens (each 3.375″ in height)
Top batten below the top of the shutter*
20% space
Center batten
80% space
Bottom batten above the bottom of the shutter*
4 battens (each 3.375″ in height)
Top batten below the top of the shutter*
40% space
Center batten
20% space
Center batten
40% space
Bottom batten above the bottom of the shutter*
2 horizontal battens*
& 1 diagonal batten forming a z or reverse-z
(each 3.375″ in height)
Pair includes one z-pattern shutter and one reverse z-pattern shutter
3 battens (each 3.375″ in height)
Top batten at top edge of shutter
50% space
Center batten
50% space
Bottom batten at bottom edge of shutter
2 horizontal battens
& 2 diagonal batten forming an x
(each 3.375″ in height)
Top batten positioned at top edge and bottom batten at bottom edge
2 battens (each 3.375″ in height)
Battens are positioned in relation to the shortest board*
Boards are of various heights.
The shutter height is the length of the longest board. The next board in succession is 3” shorter than the previous. The bottom of all boards are even. The pattern repeats for all boards.
Pair includes one left shutter and one right shutter
4 battens (each 3.375″ in height)
Top batten at top edge of shutter
33% space
Center batten
33% space
Center batten
33% space
Bottom batten at bottom edge of shutter
2 battens (each 3.375″ in height)
Top batten at top edge of shutter
Bottom batten at Bottom edge of shutter
2 battens (each 3.375″ in height)
Battens are positioned in relation to the shortest board*
Boards are two heights.
The shutter height is the length of the longest board. Shorter boards are 3” shorter at the top and 3″ shorter at the bottom than the longer boards, which are vertically centered. The pattern repeats for all boards.
6 battens (each 3.375″ in height)
Top batten at top edge of shutter
20% space
Center batten
20% space
Center batten
20% space
Center batten
20% space
Center batten
20% space
Bottom batten at bottom edge of shutter
2 battens (each 3.375″ in height)
Battens are positioned in relation to the shortest board*
Boards are of various heights.
The shutter height is the length of the longest board. The next board in succession is 3” shorter than the previous. The bottom of all boards are even. The pattern repeats for all boards.
2 battens (each 3.375″ in height)
Battens are positioned in relation to the shortest board*
The shutter height is the length of the longest board located at center. The two boards on either side are 6” shorter and centered.
This style is only for 3 boards across.
*Batten location from the top or bottom of the shortest board to the batten depends on the shutter height. Applies to styles #1 – #10, #11, #14, #18, #21 and #22.
| Shutter Height | Distance from Top or Bottom to Batten |
| 0″ – 24″ | 2″ |
| 25″ – 36″ | 3″ |
| 37″ – 48″ | 4″ |
| 49″ + | 6.5″ |
Vinyl shutters in the 19 standard colors are constructed from Polypropylene. The color is molded through the material and arrive ready to install. Polypropylene cannot be painted. The paintable finish shutters are fabricated from Polystyrene and are a translucent opal in color.
All vinyl shutters have a wood grain textured surface. Both boards and battens are are constructed in the form of a shell, with four sides, a front and a hollow back (shown at left). Both the boards and battens have a cap at either end of the component. The panels can feel flimsy right out of the box and may not have the rigidity one expects from wood or composite shutters. They gain great strength and stability when they are attached to the building.
Louvers can be oriented in a down position.
This option is recommended.
Louvers can be oriented in an up position.
A tilt bar is a narrow vertical wood rod that interconnects a group of horizontal louvers. A tilt bar used in conjunction with movable louvers unifies the slats and allows them to rotate at one time. Louvers on ShutterLand premium wood louvers are fixed in position and do not rotate. A faux tilt bar can be attached to replicate the appearance of movable louvers, usually for historical purposes. Selection of a tilt bar adds $40 to the price of each shutter.
Most exterior shutter applications do not require a tilt bar.
A tilt bar is a narrow vertical wood rod that interconnects a group of horizontal louvers. A tilt bar used in conjunction with movable louvers unifies the slats and allows them to rotate at one time. Louvers on ShutterLand composite louvers are fixed in position and do not rotate. A faux tilt bar can be attached to replicate the appearance of movable louvers, usually for historical purposes. Selection of a tilt bar adds $40 to the price of each shutter.
Most exterior shutter applications do not require a tilt bar.
Louvers can positioned in a down position.
This position is recommended because the louvers shed moisture.
Louvers can positioned in a up position. This is not a standard option and can ordered only by special request.
Up oriented louvers are not recommend because there is no space between the louvers resulting in a potential for water to reside in the grooves which may shorten the lifespan of the shutters.
A tilt bar is a narrow vertical wood rod that interconnects a group of horizontal louvers. A tilt bar used in conjunction with movable louvers unifies the slats and allows them to rotate at one time. Louvers on ShutterLand composite louvers are fixed in position and do not rotate. A faux tilt bar can be attached to replicate the appearance of movable louvers, usually for historical purposes. Selection of a tilt bar adds $40 to the price of each shutter.
Most exterior shutter applications do not require a tilt bar.
A divider rail is a horizontal bar (much like the top rail) that creates louver areas above and below the division. The divider rail height is 2.125″.
* The actual location of the divider rail may be slightly higher or lower than requested. The number of louvers will dictate the final placement.
* The actual location of the divider rail may be slightly higher or lower than requested. The number of louvers will dictate the final placement.
A divider rail is a horizontal bar (much like the top rail) that creates raised panel areas above and below the division. The divider rail height is 2.5″.
A divider rail is a horizontal bar (much like the top rail) that creates solid panel areas above and below the division. The divider rail height is 2.5″.
Red Grandis is a nearly perfect high quality hardwood to manufacture exceptional exterior shutters. It has straight tight grain and minimal knotting, resulting in a consistently smooth texture. The fibers are relatively uniform in color with variations from light pink to dark red, and accept paint or stain well. Red Grandis is dimensionally stable and extremely strong. Paneled area is composite (see below).
Cedar is the most common and recognizable tree species for the construction of outdoor shutters. This aromatic timber is resistant to both insects and decay. Cedar has condensed grain with few knots, resulting in straight handsome shutters with tones of red, brown, and tan. Cedar paints and stain well. Paneled area is composite (see below).
Mahogany has a compact grain with a rich, warm, reddish-brown hue. Mahogany shutters are strong, sturdy, and moisture resistant. Mahogany is relatively easy to finish and is heavier than other woods offered. Paneled area is composite (see below).
The central solid panel is fabricated from Extira, a composite material manufactured from sustainable wood fibers and marine-grade resins. Extira is designed for outdoor applications where humidity and moisture varies. It is strong, resilient and holds its shape in all weather conditions.
Southern Yellow Pine is the most affordable solid wood option. This wood has a beautiful golden color with a distinct wood grain pattern that is 99.9% knot free. It is kiln-dried to minimum moisture content and cut to 1″ thick shutters. The joints between stiles and rails are glued, doweled, and screwed for ultimate strength. Paneled area is composite (see below).
Southern Yellow Pine shutters are considered entry-level, or builder grade, with lower performance standards compared to 1.5″ thick premium wood shutters.
The central solid panel is fabricated from Extira, a composite material manufactured from sustainable wood fibers and marine-grade resins. Extira is designed for outdoor applications where humidity and moisture varies. It is strong, resilient and holds its shape in all weather conditions.
A divider rail is a horizontal bar (much like the top rail) that creates louver areas above and below the division. The divider rail height is 3.5″.
* The actual location of the divider rail may be slightly higher or lower than requested. The number of louvers will dictate the final placement.
* The actual location of the divider rails may be slightly higher or lower than requested. The number of louvers will dictate the final placement.
Straight top shutters have a standard horizontal top.
The arch of a 1:1 drop is equal to the width. So the measurement from the top of the shutter down to the start of the arch is the same as the shutter width.
A pair of arch top shutters includes one shutter with the arch on the left side and one with the arch on the right.
A custom arch requires a springline measurement.
Springline – the dimension from the top of the shutter down to the start of the arch.
A pair of arch top shutters includes one shutter with the arch on the left side and one with the arch on the right.
Flat panel shutters are constructed with a central even surface with no detail.
Shaker panel shutters are fabricated with vertical grooves cut into the central surface. The number of grooves is based on the shutter width.
Vertical grooves:
2 grooves for shutter widths 12” to 17 ¾”
3 grooves for shutter widths 18” to 23 ¾”
4 grooves for shutter widths 24” to 31 ¾”
5 grooves for shutter widths 32” to 39 ¾”
6 grooves for shutter widths 40” to 45”
Most vinyl shutters are manufactured within a window of 1-3 weeks. This projection is calculated based on current orders moving through the shop. We evaluate and update the forecast daily and we work diligently to meet the production time quoted.
All shutters are made to order and additional time is occasionally necessary to successfully complete the process. We will communicate any unanticipated delays.
It is possible that shutters are finished quicker than projected.
Vinyl shutters are shipped from our manufacturing facility in Illinois when complete. You will receive an email notification with tracking information shortly after the order departs.
ShutterLand has a great reputation for both service and quality of product. Our success is predicated on your experience. We currently have 500+ Google reviews with an average score of 4.8. We encourage you to view as many as possible.
We also have reviews on Houzz and Facebook. Visit our comments page to view comments from customers sent directly to ShutterLand.
Most wood shutters ship FREE!
A one-time $300 oversize shipping fee is charged only if:
The shipping amount will be added in the shopping cart.
This is a one-time charge and the total shipping amount will not exceed $300.
Most wood shutters are manufactured within a window of 4-6 weeks. This projection is calculated based on current orders moving through the shop. We evaluate and update the forecast daily and we work diligently to meet the production time quoted.
All shutters are made to order and additional time is occasionally necessary to successfully complete the process. We will communicate any unanticipated delays.
It is possible that shutters are finished quicker than projected.
Wood shutters are shipped from our manufacturing facility in Alabama when complete. You will receive an email notification with tracking information shortly after the order departs.
Most composite shutters are manufactured within a window of 4-5 weeks. This projection is calculated based on current orders moving through the shop. We evaluate and update the forecast daily and we work diligently to meet the production time quoted.
All shutters are made to order and additional time is occasionally necessary to successfully complete the process. We will communicate any unanticipated delays.
It is possible that shutters are finished quicker than projected.
Composite shutters are shipped from our manufacturing facility in Alabama when complete. You will receive an email notification with tracking information shortly after the order departs.
Most Pine shutters are manufactured within a window of 4-6 weeks. This projection is calculated based on current orders moving through the shop. We evaluate and update the forecast daily and we work diligently to meet the production time quoted.
All shutters are made to order and additional time is occasionally necessary to successfully complete the process. We will communicate any unanticipated delays.
It is possible that shutters are finished quicker than projected.
Wood shutters are shipped from our manufacturing facility in Alabama when complete. You will receive an email notification with tracking information shortly after the order departs.
Most vinyl shutters ship FREE!
A one-time $300 oversize shipping fee is charged only if:
| Width | Height | One Time Oversize Shipping Rate |
| 14.5″ | >= 92″ | $200 |
| 16.25″ | >= 88″ | $200 |
| 17.75″ | >= 86″ | $200 |
| 13″ | >= 96″ | $200 |
| 14.875″ | >= 92″ | $200 |
| 19″ | >= 84″ | $200 |
| 20.875″ | >= 80″ | $200 |
| 23.875″ | >= 74″ | $200 |
| 25.75″ | >= 70″ | $200 |
| 27.5″ | >= 66″ | $200 |
| 29′ | >= 64″ | $200 |
The shipping amount will be added in the shopping cart.
This is a one-time charge and the total shipping amount will not exceed $300.
Most vinyl shutters ship FREE!
A one-time $300 oversize shipping fee is charged only if:
| Width | Height | One Time Oversize Shipping Rate |
| 13.875″ – 4 Boards | >= 90″ | $300 |
| 16″ – 4 Boards | >= 90″ | $300 |
| 17.25″ – 5 Boards | >= 82″ | $300 |
| 20″ – 5 Boards | >= 82″ | $300 |
| 20.75″ – 6 Boards | >= 72″ | $300 |
| 23.875″ – 7 Boards | >= 64″ | $300 |
| 24.375″ – 6 Boards | >= 72″ | $300 |
| 27.25″ – 8 Boards | >= 56″ | $300 |
| 28.625″ – 7 Boards | >= 64″ | $300 |
| 33″ – 8 Boards | >= 56″ | $300 |
The shipping amount will be added in the shopping cart.
This is a one-time charge and the total shipping amount will not exceed $300.
All wood Bahama shutters ship for FREE!
Most composite shutters ship FREE!
A one-time $300 oversize shipping fee is charged only if:
The shipping amount will be added in the shopping cart.
This is a one-time charge and the total shipping amount will not exceed $300.
Most composite shutters are manufactured within a window of 4-6 weeks. This projection is calculated based on current orders moving through the shop. We evaluate and update the forecast daily and we work diligently to meet the production time quoted.
All shutters are made to order and additional time is occasionally necessary to successfully complete the process. We will communicate any unanticipated delays.
It is possible that shutters are finished quicker than projected.
Composite shutters are shipped from our manufacturing facility in Alabama when complete. You will receive an email notification with tracking information shortly after the order departs.
Most PVC shutters ship FREE!
A one-time $300 oversize shipping fee is charged only if:
The shipping amount will be added in the shopping cart.
This is a one-time charge and the total shipping amount will not exceed $300.
Most PVC shutters are manufactured within a window of 4-5 weeks. This projection is calculated based on current orders moving through the shop. We evaluate and update the forecast daily and we work diligently to meet the production time quoted.
All shutters are made to order and additional time is occasionally necessary to successfully complete the process. We will communicate any unanticipated delays.
It is possible that shutters are finished quicker than projected.
Wood shutters are shipped from our manufacturing facility in Alabama when complete. You will receive an email notification with tracking information shortly after the order departs.
A one-time standard shipping rate is charged per region.
The shipping amount will be added in the shopping cart.
Most aluminum shutters are manufactured within a window of 8-10 weeks. This projection is calculated based on current orders moving through the shop. We evaluate and update the forecast daily and we work diligently to meet the production time quoted.
All shutters are made to order and additional time is occasionally necessary to successfully complete the process. We will communicate any unanticipated delays.
It is possible that shutters are finished quicker than projected.
Aluminum shutters are shipped from our manufacturing facility in Florida when complete. You will receive an email notification with tracking information shortly after the order departs.
PVC exterior shutters install to the side of the window using one of two methods.
Stationary shutters permanently attach to the side of the window in a fixed location.
Functional shutters mount with operable exterior hardware to pivot from a position flanking the window to cover the window opening.
How the window is measured depends on which of these two options is selected.
The number of boards is based on the shutter width.
Four available
Closed-weave
7.75″ – 2 boards
11.625″ – 3 boards
15.5″ – 4 boards
19.375″ – 5 boards
Top batten placed 5” below top of shutter
Bottom batten placed 5” above bottom of shutter
Battens 3.5″ in height
Width 0.875” less than shutter
Configuration optional when shutter height less than 55″.
A third batten is required when the shutter height is equal to or greater than 55″. (The two batten option will become unavailable on the order page)
Top batten placed 5” below top of shutter
Batten placed at center
Bottom batten placed 5” above bottom of shutter
Battens 3.5″ in height
Width 0.875” less than shutter
A fourth batten is required when the shutter height is equal to or greater than 82″. (The three batten option will become unavailable on the order page)
Top batten placed 5” below top of shutter
Two battens equally spaced between top and bottom
Bottom batten placed 5” above bottom of shutter
Battens 3.5″ in height
Width 0.875” less than shutter
Top batten placed 5” below top of shutter
Batten placed at diagonal from bottom right of top batten to top left of bottom batten
Bottom batten placed 5” above bottom of shutter
Battens 3.5″ in height
Width 0.875” less than shutter
Top batten placed 5” below top of shutter
Batten placed at diagonal from bottom left of top batten to top right of bottom batten
Bottom batten placed 5” above bottom of shutter
Battens 3.5″ in height
Width 0.875” less than shutter
